Jump to content
Click or hover over image to zoom in

Rear cover axis support - PET-G - 7700792362

(0 reviews)
2.50 EUR *
4 in stock
Rear axis support. 3D printed in PET-G.
 
This part replica, conceived by one of our members @GBFIAlex, will let you replace a broken one. It is the same for both sides of the luggage rack.
 
The printing is done "by hand" with a general public 3D printer with the resulting finish : rough areas due to the presence of printing supports, streaks, etc. (see photos) are therefore completely normal. The customer can use it as is or sand it to paint it if he wishes.
The printing material used is PET-G, it is the same material as that of conventional plastic bottles (fruit juice, water, etc ...) currently used and widespread. It is suitable for heat** and UV resistance.
 
*VAT: prices displayed excluding taxes outside Switzerland (EU and rest of the world), product shipped from Switzerland (outside the EU). Additional customs and VAT fees may be added for the rest of the world (excluding Switzerland), see our GTC.
 
Stock: Why are there so few parts available / in stock? As these kits are handcrafted, in order to avoid an overflow of orders that we could not keep, you see the stock of kits produced in advance and ready to send. Once the inventory is at 0, you will have to wait for the production of new ones before you can re-order them.
 
**Heat resistance: the bending temperature of PET-G is 82 ° C, which means that in the middle of summer or in a hot country, if you leave your car in the sun, it may cause deformation if this temperature is reached or exceeded. We advise you to always use a sun visor and open the windows slightly (2cm is sufficient) in order to better reduce the temperature in your cockpit. Taking this warning into account, deformations due to heat are neither taken back nor refounded.

 Share

About Rear cover axis support - PET-G - 7700792362

Rear axis support. 3D printed in PET-G.

 

This part replica, conceived by one of our members @GBFIAlex, will let you replace a broken one. It is the same for both sides of the luggage rack.
 

The printing is done "by hand" with a general public 3D printer with the resulting finish : rough areas due to the presence of printing supports, streaks, etc. (see photos) are therefore completely normal. The customer can use it as is or sand it to paint it if he wishes.
The printing material used is PET-G, it is the same material as that of conventional plastic bottles (fruit juice, water, etc ...) currently used and widespread. It is suitable for heat** and UV resistance.

 

*VAT: prices displayed excluding taxes outside Switzerland (EU and rest of the world), product shipped from Switzerland (outside the EU). Additional customs and VAT fees may be added for the rest of the world (excluding Switzerland), see our GTC.

 

Stock: Why are there so few parts available / in stock? As these kits are handcrafted, in order to avoid an overflow of orders that we could not keep, you see the stock of kits produced in advance and ready to send. Once the inventory is at 0, you will have to wait for the production of new ones before you can re-order them.

 

**Heat resistance: the bending temperature of PET-G is 82 ° C, which means that in the middle of summer or in a hot country, if you leave your car in the sun, it may cause deformation if this temperature is reached or exceeded. We advise you to always use a sun visor and open the windows slightly (2cm is sufficient) in order to better reduce the temperature in your cockpit. Taking this warning into account, deformations due to heat are neither taken back nor refounded.

Shipping Size

  • Size
    1.85 in × 0.59 in × 0.91 in
  • Weight
    0.04 lb

There are no reviews to display.

×
×
  • Create New...

Important Information

By using this site, you agree to our terms Terms of Use of use and privacy policy Privacy Policy.