Jump to content
Click or hover over image to zoom in

Cap repairing kit LARGE - 3D Printed UV resin - 7700755173 D a G

(0 reviews)
29.35 EUR *
0 in stock
Repair kit to repair for the dashboard cap, it allows to repair a cap whose legs have broken.
You will find the assembly instructions in this dedicated tutorial: Cap Repair Howto (automatically translated from french)
 
This one of a kind kit to date and designed by ourselves, includes a left leg and a right leg for a complete repair.
 
The print is made "handcrafted" with a consumer 3D printer with the resulting finish: rough areas due to the presence of print media, streaks, etc... (see photos) are therefore completely normal. The buyer may choose to use it as it is or sand it to paint it if he wishes.
The printing material used is UV resin, it is a resin that hardens thanks to Ultraviolet rays. It is well resistant to heat** and of course to UV rays.

IMPORTANT: the legs of these parts, although a little more reinforced than those of the original caps, are still fragile due to their thickness. We recommend that you do not replace the original metal clips to facilitate and reduce the risk of breakage if it needs to be removed later.

*VAT: prices displayed excluding taxes outside Switzerland (EU and rest of the world), product shipped from Switzerland (outside the EU). Additional customs and VAT charges may be added for the rest of the world (outside Switzerland), see our T&Cs.

Stock: Why are there so few parts available/in stock? As these kits are handcrafted, in order to avoid an overflow of orders that we could not hold, you see the stock of kits produced in advance and ready to be sent. Once the inventory is at 0, you will have to wait for new ones to be produced before you can re-order them.

Images & Photos: The shape of the kit that will be delivered to you may vary slightly from what you see in the product images/photos here in the shop. These slight differences correspond to the improvements & optimizations that we can make to the product, in order to make it more robust in particular; no worries, it will remain fully compatible with your dashboard. The finish has roughness due to the printing supports (small dots) and "shapes" on certain surfaces (sort of grid), the printing layers are visible as well as the finishing sanding; these aspects vary from one print to another, but remain quite close to the rendering shown in the photos.

**Heat resistance: we tested this resin at 100°C, considered among the most resistant on the market, at this temperature, it has good resistance to compression, but begins to show a certain friability and ability to be folded. It is clearly more resistant than PET-G (material that we previously used for this type of printing). We advise you to always use a sun visor and to open the windows slightly (2cm is enough) in order to reduce the temperature it can make in your cockpit. Taking this warning into account, deformations due to heat are neither taken back nor reimbursed.

 Share

About Cap repairing kit LARGE - 3D Printed UV resin - 7700755173 D a G

Repair kit to repair for the dashboard cap, it allows to repair a cap whose legs have broken.
You will find the assembly instructions in this dedicated tutorial: Cap Repair Howto (automatically translated from french)

 

This one of a kind kit to date and designed by ourselves, includes a left leg and a right leg for a complete repair.

 

The print is made "handcrafted" with a consumer 3D printer with the resulting finish: rough areas due to the presence of print media, streaks, etc... (see photos) are therefore completely normal. The buyer may choose to use it as it is or sand it to paint it if he wishes.
The printing material used is UV resin, it is a resin that hardens thanks to Ultraviolet rays. It is well resistant to heat** and of course to UV rays.


IMPORTANT: the legs of these parts, although a little more reinforced than those of the original caps, are still fragile due to their thickness. We recommend that you do not replace the original metal clips to facilitate and reduce the risk of breakage if it needs to be removed later.


*VAT: prices displayed excluding taxes outside Switzerland (EU and rest of the world), product shipped from Switzerland (outside the EU). Additional customs and VAT charges may be added for the rest of the world (outside Switzerland), see our T&Cs.


Stock: Why are there so few parts available/in stock? As these kits are handcrafted, in order to avoid an overflow of orders that we could not hold, you see the stock of kits produced in advance and ready to be sent. Once the inventory is at 0, you will have to wait for new ones to be produced before you can re-order them.


Images & Photos: The shape of the kit that will be delivered to you may vary slightly from what you see in the product images/photos here in the shop. These slight differences correspond to the improvements & optimizations that we can make to the product, in order to make it more robust in particular; no worries, it will remain fully compatible with your dashboard. The finish has roughness due to the printing supports (small dots) and "shapes" on certain surfaces (sort of grid), the printing layers are visible as well as the finishing sanding; these aspects vary from one print to another, but remain quite close to the rendering shown in the photos.


**Heat resistance: we tested this resin at 100°C, considered among the most resistant on the market, at this temperature, it has good resistance to compression, but begins to show a certain friability and ability to be folded. It is clearly more resistant than PET-G (material that we previously used for this type of printing). We advise you to always use a sun visor and to open the windows slightly (2cm is enough) in order to reduce the temperature it can make in your cockpit. Taking this warning into account, deformations due to heat are neither taken back nor reimbursed.

Shipping Options

Shipping options and prices may vary depending on the total value of your order. Your final shipping price will be determined at checkout.
IMPORTANT : IMPORTANT: If you are unable to obtain a shipping rate for your country, please do not hesitate to Contact Us so that we can add it to the list.
WARNING: With the current COVID-19 crisis the delivery may be delayed by 10 or 20 days, sometimes even more.

Options shown are based on your estimated location.

  • 17.80 EUR - Tracked Mail (< 2Kg) - World (8-20 days according to the country)
  • 19.37 EUR - Delivery against signature (< 2Kg) - World (8-20 days according to the country)

Shipping Size

  • Size
    0.79 in × 6.1 in × 3.74 in
  • Weight
    0.31 lb

There are no reviews to display.

×
×
  • Create New...

Important Information

By using this site, you agree to our terms Terms of Use of use and privacy policy Privacy Policy.