Jump to content
Click or hover over image to zoom in

Smple lever - SLS Nylon - 7701202225

(0 reviews)
4.80 EUR *
3 in stock
Simple lever (see photos, ref 2) printed in UV resin. The originals sometimes bear the reference 261109768X written above.
 
IMPORTANT: There are several possible lever models, be sure to choose the model that corresponds with your heating unit. Please also note that we do not (yet) have reproductions of all models that have existed. There will be no return or exchange in the event of an error.
 
The printing is done "by hand" with a general public 3D printer with the resulting finish : rough areas due to the presence of printing supports, streaks, etc. (see photos) are therefore completely normal. The customer can use it as is or sand it to paint it if he wishes.
The printing material used is UV resin, it is a resin that hardens thanks to Ultraviolet rays. It is well resistant to heat** and of course to UV rays.
 
*VAT: prices displayed excluding taxes outside Switzerland (EU and rest of the world), product shipped from Switzerland (outside the EU). Additional customs and VAT fees may be added for the rest of the world (excluding Switzerland), see our GTC.
 
Stock: Why are there so few parts available / in stock? As these kits are handcrafted, in order to avoid an overflow of orders that we could not keep, you see the stock of kits produced in advance and ready to send. Once the inventory is at 0, you will have to wait for the production of new ones before you can re-order them.
 
**Heat resistance: we tested this resin at 100°C, considered among the most resistants on the market, at this temperature it has good resistance to compression, but begins to show some friability and aptitude to bend. It is clearly more resistant than PET-G (material that we previously used for this type of printing). We advise you to always use a sun visor and to open the windows slightly (2cm is enough) in order to reduce the temperature it can make in your cockpit. Taking this warning into account, deformations due to heat are neither taken back nor reimbursed.
 

 Share

About Smple lever - SLS Nylon - 7701202225

Simple lever (see photos, ref 2) printed in UV resin. The originals sometimes bear the reference 261109768X written above.

 

IMPORTANT: There are several possible lever models, be sure to choose the model that corresponds with your heating unit. Please also note that we do not (yet) have reproductions of all models that have existed. There will be no return or exchange in the event of an error.

 

The printing is done "by hand" with a general public 3D printer with the resulting finish : rough areas due to the presence of printing supports, streaks, etc. (see photos) are therefore completely normal. The customer can use it as is or sand it to paint it if he wishes.
The printing material used is UV resin, it is a resin that hardens thanks to Ultraviolet rays. It is well resistant to heat** and of course to UV rays.

 

*VAT: prices displayed excluding taxes outside Switzerland (EU and rest of the world), product shipped from Switzerland (outside the EU). Additional customs and VAT fees may be added for the rest of the world (excluding Switzerland), see our GTC.

 

Stock: Why are there so few parts available / in stock? As these kits are handcrafted, in order to avoid an overflow of orders that we could not keep, you see the stock of kits produced in advance and ready to send. Once the inventory is at 0, you will have to wait for the production of new ones before you can re-order them.

 

**Heat resistance: we tested this resin at 100°C, considered among the most resistants on the market, at this temperature it has good resistance to compression, but begins to show some friability and aptitude to bend. It is clearly more resistant than PET-G (material that we previously used for this type of printing). We advise you to always use a sun visor and to open the windows slightly (2cm is enough) in order to reduce the temperature it can make in your cockpit. Taking this warning into account, deformations due to heat are neither taken back nor reimbursed.

 

Shipping Options

Shipping options and prices may vary depending on the total value of your order. Your final shipping price will be determined at checkout.
IMPORTANT : IMPORTANT: If you are unable to obtain a shipping rate for your country, please do not hesitate to Contact Us so that we can add it to the list.
WARNING: With the current COVID-19 crisis the delivery may be delayed by 10 or 20 days, sometimes even more.

Options shown are based on your estimated location.

  • 12.57 EUR - Tracked Mail (< 2Kg) - World (8-20 days according to the country)
  • 14.14 EUR - Delivery against signature (< 2Kg) - World (8-20 days according to the country)

Shipping Size

  • Size
    0.79 in × 0.79 in × 0.79 in
  • Weight
    0.07 lb

There are no reviews to display.

×
×
  • Create New...

Important Information

By using this site, you agree to our terms Terms of Use of use and privacy policy Privacy Policy.